Texas Aluminum Industries, Inc. (TAI) Baked Enamel Aluminum Products are manufactured to the
highest standards of workmanship in aluminum fabrication. TAi warrants to buyer that the baked enamel finish will not
chip, crack, blister or peel (except for slight cracking or grazing that might occur on tightly rolled formed sections or
break bond during the forming of pre-painted sheet and which is accepted as standard) for a period of 10 Years from
the date of purchase from TAi.
|
This Warranty does not cover damage or deterioration caused by normal weathering or by negligence in
or failure to provide the normal maintenance and cleaning of the product (*see The Care and Maintenance of Painted Aluminum
Products to follow), faulty installation, damage caused by Acts of God such as earthquake, lightning, windstorm, hailstorm or
other occurrences beyond TAi's control such as riots, acts of war or abuse. Steel products are not warranted against rust.
|
If baked enamel paint finish defect should occur, repair or replacement of defective materials will
be made Freight Collect from the nearest TAi Warehouse. This Warranty is for material only and does not include labor. TAi
reserves the right to discontinue or change items in its product line. Should the product covered under the Warranty not be
available, TAi shall have the right to substitute a product that in TAi's opinion is of equal grade, quality and price. Normal
exposure to the elements may preclude a perfect color match of original material with replacement.
|
TAi is giving you an express ten (10) year limited warranty under the provisions of the
Magnuson-Moss Federal Warranty Act; TAi cannot and shall not be liable to you for breach of any other written
or oral express warranties, if any, given to you by dealers, contractors, applicators or distributors of baked enamel
painted products. Any implied warranties imposed by Law, such as the implied warranties of merchantability and fitness
for purpose are limited in time to the duration of this express warranty. TAi shall not be liable to you for any consequential
damages or incidental damages for breach of any express, written, oral or implied warranty to the Products. Any
claims do not extend the duration of the Warranty.
|
Legal Rights
Some states do not allow limitations or how long an implied
warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives
you specific legal rights and you may also have other rights which may vary from state to state.
|
TAi will not be liable for any consequential damages for breach of this express warranty.
Any claim must be made in writing by the buyer to: Texas Aluminum Industries, Inc., 2900 Patio Drive, Houston,
TX 77017 - Attention: Warranty Department. Be sure to include buyer name, address, phone number and a copy
of original invoice, date purchased, description of unit and TAi dealer name, address and phone number. Replacement
of materials does not extend warranty period.
|
Copyright - Texas Aluminum Industries, Inc. - 2/96
|
*THE CARE AND MAINTENANCE OF PAINTED ALUMINUM PRODUCTS
|
INSTRUCTIONS:
|
To enjoy the beauty of TAi Products for a longer time, you should follow a few simple cleaning procedures.
|
For surface soil or stains resulting from industrial fallout, tree sap, insecticides or chimney fumes, the
use of ordinary non-abrasive household detergent is recommended. (1/3 cup of detergent per gallon of water)
|
Use a soft rag, sponge or soft bristle brush to apply the solution. Soft bristle brushes equipped
with long extension handles may be used to reach some of the higher areas.
|
As with any cleaning operation, less streaking will result if the product is thoroughly rinsed
with fresh water from a garden hose.
|
STUBBORN STAINS:
|
If stubborn stains are encountered, use a heavy-duty cleanser such as "Fantastik", available in
supermarkets or "Industro-Clean" available from local Amway Distributors. Heavy soil deposits may not be removable in
one application and may require repeated cleaning. CAUTION: DO NOT USE CLEANSERS CONTAINING ABRASIVE
PARTICLES, SOLVENT OR AMMONIATED TYPE CLEANSERS OR PAINT REMOVER FOR CLEANING YOUR PRODUCTS.
THESE MATERIALS MAY SOFTEN OR ACTUALLY REMOVE YOUR PRODUCT'S FINISH.
|
CLIMATIC CONDITIONS:
|
Climatic conditions vary considerably from one locality to the next. In some locales, mildew
may be a problem. It appears as black spots occurring on the surface dirt and is usually first detected in areas not
subject to direct rainfall, such as under eaves or porch enclosures. For removal, prepare a solution as follows and
comply to the aforementioned washing and rinsing procedures.
|
1/3 Cup Detergent (Washing Powder) 2/3 Cup Trisodium Phosphate (Soilex for example) 1
Quart 5% Sodium Hypochlorite (Clorox for example) 3 Quarts Water
|
CAUTION: GREATER CONCENTRATIONS MAY CAUSE DAMAGE TO PRODUCTS
|
Top of Page
|